Jump to content

All Activity

This stream auto-updates     

  1. Earlier
  2. pritiwebmaster

    plumbing service in Dubai

    Think you need plumbing service in Dubai? New Era professional’s technical service is top-notch plumber company in Dubai. We are fully trained and very experience of plumbing services including installation, repair and maintenance. We deliver superb customer service and have received many positive comments and we have many satisfied clients. if you have any plumbing problems in your home, such as damp wall, increase the utility bill, hurt your home etc. then don’t worry our plumbing services is quick , reliable and highly efficient than other plumber companies in Dubai.
  3. AlbertoEspinoza

    23K lines of code license

    Hi, You can contact our sales department via email for more information, info@mobilize.net
  4. mtallon

    23K lines of code license

    Hello, I need to convert to .NET C# and old program in VB6, Miamod (Mortality and Incidence Analysis MODel - http://www.eurocare.it/MiamodPiamod/tabid/60/Default.aspx), a free software ad hoc developed by Italian National Health Institute in consultation with the Surveillance Research Program of the Division of Cancer and Population Sciences (National Cancer Institute, Bethesda USA) for estimating incidence and prevalence from population-based Cancer Registries data. It is about 23K lines of code (please find the attached assessment report. ). How much does it cost a license? Assessment-Miamod V 2.1.0-201811150807.zip
  5. squidmb

    dataform.ocx will not register

    I am using a Windows 10 system for the conversion to VB.net. Most has gone swimmingly, but I get "Did not find a registered ActiveX control in ....\dataform.ocx" error in the new build. dataform.ocx was missing from the project, so I downloaded version 6.0.0.8169 (file size 529 kB, date modified 06/24/1998 1:00 AM) from Microsoft and placed it in C:\Windows\SysWow64. Then I attempted to register it using Regsvr32.exe. I get the error "Module dataform.ocx was loaded but the call to DLLRegisterServer failed with error code 0x80004005". The 0x80004005 error code means there is a permissions problem. However, I am logged in as an administrator AND ran the program as Administrator. I have tried un-registering it (same error). Any suggestions? Getting rid of dataform.ocx altogether is an option, but I'm not sure what that involves (what VB.net substitutions are needed for the wrapped-up VB6 ActiveX needs). Thanks, Dave
  6. John Browne

    Missing .dll Upon Conversion

    Look in the VBUC references screen to see if that DLL was referenced by your original VB6 project. The VBUC would not create this--it's some kind of private library, not a Microsoft .NET library.
  7. abowlin

    Missing .dll Upon Conversion

    That makes sense, but my concern is that AMB_Test5Support.dll does not exist. It is not in the upgrade folder created by the VBUC and was not a previously existing .dll on my computer. Is it possible the VBUC should have created the .dll but in fact did not?
  8. John Browne

    Missing .dll Upon Conversion

    Visual Studio is telling you that you have a dependency on a DLL (AMB_Test5Support.dll) that it can't find in the location listed in your project file. Check your development environment and point VS to the correct path for that DLL and you should be ok.
  9. abowlin

    Missing .dll Upon Conversion

    Converting a vb6 program into a vb.net program appeared to be successful, but upon attempting to build the program in visual studio 2017, I am getting the error below. It appears that a .dll has not been created by the conversion software. How can I create this .dll or how can I configure the conversion tool to create the .dll successfully? Error BC2017 could not find library 'C:\Users\abowlin\Documents\Anthony M. Bowlin (2018)\Jobs\TRW Msetup Conversion 2\TRW Lebanon Version_.Net\Upgraded\AMB_Test5Support\bin\Debug\AMB_Test5Support.dll'
  10. Dear VBUC, I have problem when build solution. Could not load file Interop.StdType. I choose .NET Framework 4.0 Please help me!
  11. Hi Romeo, If during the download process you were not prompt to register please go to the following form https://www.mobilize.net/vbuc-free-trial and then either use the download button with the email you will receive or use the file you’ll get in the email after filling-out the form. Please let me know if this works. Regards, OlmanQ
  12. Hi Romeo, We studied your case and it seems it happened for two possible reasons. 1) It seems like you skipped the form to register in Mobilize. 2) The second possibility could be you used a different email from step 1. Please let me know if it fixes your problem.
  13. Hi VUBC, I have a problem. When i download free trial my PC always show dialog "Could not find a trial license associated to the specified email" Please check license file. Thank.
  14. Romeo

    Trial version

    Hi Will, I have same proble. Please send me license. Can you help me please.
  15. OlmanQuesada

    Problem with upgrade

    Hi Astrid, In regards with the first error in Windows 7, please follow the next steps: [Workarround Steps] 1. Open a Windows command prompt with administrator privileges 2. Go the Mobilize.Net VBUC folder, where the binary files are located. It is very possible this folder is: “C:\Program Files (x86)\Mobilize.Net Visual Basic Upgrade Companion\” 3. Execute the following commands: Vbu.exe /regserver C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\RegAsm.exe ArtinSoft.VisualBasic.UpgradeExtensions.dll C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\RegAsm.exe VBUpgrade.Engine.dll C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\RegAsm.exe VBUpgrade.Utils.dll C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\RegAsm.exe ResxManager.dll C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\RegAsm.exe VBUpgrade.OcxStateGenerator.dll I'd like to review with you the Dot Net class issue. Would you be available for a remote session at this moment? If so, this is the zoom URL https://mobilize.zoom.us/j/383181282 Otherwise, we can coordinate a session for Tuesday next week just let me now your availability. Regards, OlmanQ
  16. Astrid

    Problem with upgrade

    Thank you for the Response. We use Win7 prof. Now here is the screenshot of this Problem: We tested it also on a new Win 7 prof Installation. On this it works well. We are not entirely satisfied with the result, since we address a new Dot Net class in this project and the translator did not recognize it and correctly linked it.
  17. OlmanQuesada

    Problem with upgrade

    Hello Astrid, Are you migrating the code using Windows 10 or any other windows version? Please send us an screenshots of the Solution and Resolve Reference section of the VBUC. The issue may be caused because there's a missing reference in the VB6 code (DLL with CLSID 11C67C12-105A-4F42-A5C8-CB9070F2855A). Thanks, Olman Q
  18. Astrid

    Problem with upgrade

    Hello, I want to test the converter with your sample code, but the conversion fails ever at the option upgrade. The upgrade log shows always the error of the com-classfactory. How can the problem be solved? VBUMLOGFILE.log
  19. acesbron

    Trial version

    Thanks. It's true, last I will try your solution, but I finally not have the time to do it. but now I have the time, So thnaks for your help. Regards, Arnaud CESBRON
  20. willvv

    Trial version

    Hello Arnaud, After reviewing our logs it seems that the problem was with the messaging because you had already downloaded a trial license last year. I just re-generated a new trial license and sent it to your email (using the address you submitted today). Now you should be able to download the license or use the one attached to the email. Please let us know if you have any other questions (and be sure to download the latest VBUC, version 8.1, it has lots of improvements!) Regards, - Will
  21. OlmanQuesada

    Trial version

    Hello Arnaud, The email with the license was empty without any attached file?
  22. acesbron

    Trial version

    Hello, when i try to download de trial licence file, i have this message : could not find a trial license to the specified email. Why ? Can you help me please. Arnaud CESBRON
  23. OlmanQuesada

    rs.Properties("Unique Table")

    You should recreate a new update from scratch that reflects the changes in that table. Please take a look at this URL https://stackoverflow.com/questions/34623292/how-to-update-a-table-using-join-in-visual-studio
  24. OlmanQuesada

    References msdatasrc is already set - error CS0012

    Hello, In screenshots 3 and 4, there are two issues that have to be solved manually. 1. The first is related to MSComDlg objects. In vb6 there exist only one single dialog object with several functionalities: print dialog, color dialog, open file dialog, etc. In .Net there are specific dialog objects according to their functionality. For instance, there is a openfile dialog, print dialog, etc. The VBUC tool converts every MSComDlg object into their respective equivalences in .Net, so if you find a single MSComDlg object in your VB6 form, the upgraded form in .Net would have as many .Net dialog objects as functioanlities detected in the original application. However, for non upgraded library elements of the original MSComDlg , it will create a stub class called UpgradeStubs.AXMsComDlg_AXCommonDialog. This stub class may reference enums or types defined in the MSComDlg Activex component. To avoid the error in screen 3 there are two paths: b. Verify what are the nn-upgraded elements for the UpgradeStubs.AXMsComDlg_AXCommonDialog instance created in that form and replace them by .Net functionality. a. Include a reference to the MSComDlg object and then perform (a). 2. In regards with the second issue (screenshot 4), the error is generated because rst that is declared as object and in runtime it's created as ADORecordsetHelper (implementation of a .Net DataSet) is being cast to msdatasrc.DataSource and that casting is incorrect because msdatasrc .DataSource is an unmanaged type while ADORecordsetHelper is a .Net type. What is the datatype for cboTeileNr? I looks like it's an Activex object. Regards, OlmanQ
  25. Hello, thanks for this nice piece of Software. I've got a problem at step 2. Resolve References: This reference 831FDD16-0C5C-11D2-A9FC-0000F8754DA1 I didn't find in my .vbp-file. I've solved this with a reference to MSCOMCTL.ocx. After that every things works fine :-) But after the start of visual studio 2017 I got a problem with the references as you see in the last screenshot. Error Code: CS0012 Error Description: The type "DataSource" isn't defined in one of the referenced assemblies. Add a reference on the assembly "Interop.MSDATASRC", Version 1.0.0.0, Culture=neutral, PublicKeyToken=null" This reference is already set (see on the right side). The problem is located on the data-comboboxes. What I have to do to solve this problem? Every support is appreciated. Thanks a lot! Thomas
  26. OlmanQuesada

    Winsock not listening

    Hello Dion, Do you have a firewall that may be blocking connections attempts? You can try by implementing the winsock error event to trap error messages. My suggestion given you're now in .Net, replace the winsock by System.Net.Sockets. The communication between .Net and Interop/Activex components my be not as smoothly as expected, so using a pure .Net component could be the best option. Some guides about .Net sockets: https://docs.microsoft.com/en-us/dotnet/framework/network-programming/synchronous-client-socket-example https://docs.microsoft.com/en-us/dotnet/framework/network-programming/synchronous-server-socket-example
  1. Load more activity
  • Newsletter

    Want to keep up to date with all our latest news and information?

    Sign Up
×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use